Liquid Lens
Measuring Inner Wall Lens
Measuring Outer Wall Lens
Multi-angle Lens
Oblique Lens
High Performance Internal Coaxial Telecentric Lens
Ring Light
Bar Light
Coaxial Light
Back Light
Dome Light
Telecentric Light
Spot Light
Parallel Focus Light
High Bright Line Light
Plane Shadowless Light
Square Shadowless Light
Needle Inspection Light
Arch-shaped Light
Structural Light
Follow us
Scan the code to enter the product selection mini-program.
Combining constant light emission and ON/OFF light emission in one.
Manual stepless brightness adjustment, simple operation.
Installation method: Screw installation or DIN rail installation
The external trigger input is designed with a high-speed optocoupler,which is highly reliable and fast.
Download
| Product model | LT-PL0520-4CH-VB | LT-PL0530JQ-4CH-VB | LT-PL0530HC-4CH-VB |
| Drive mode | Variable current control | ||
| Dimming method | Panel knob | ||
| External trigger | |||
| Strobe pulse width | 0~999 ms (In this mode, the light source brightness is at its maximum and cannot be changed.) | ||
| Input voltage | AC100-240V 50/60Hz | ||
| Number of channels | 4 | ||
| Output voltage | DC 5V | ||
| Maximum output current | 680mA | 900mA | 1100mA |
| Total power | 14W | 18W | 22W |
| Output port | SMP-03V-BC (1: NC 2: Output + 3: Output -) | ||
| External trigger voltage | DC 5V to 24V (current approximately 5.6mA) | ||
| Trigger delay | <20 u s | ||
| Use temperature and humidity | Operating temperature: 0~40℃, humidity: 20~85%RH (non-condensing) | ||
| Save temperature and humidity | Temperature: -20 to 60℃, Humidity: 20 to 85% RH (non-condensing) | ||
| Cooling method | Natural cooling | ||
| weight | 600g or less | ||
